This preview shows pages 1–2. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: -When a car passes the exit sensor, the exit gate is opened-The number of cars that are allowed in the parking lot can be set by using a 3-digit keypad connected to a 16-point input card in slot #5 of the PLC-This value can only be changed when a N.O. toggle switch is activated-While the toggle switch is active, the parking lot is closed and no cars are allowed to enter or leave R. Khan Nov. 2009-There is also a N.O. manual Reset toggle switch which allows the operator to restart from an empty lot-A 3-digit 7-segment LED display connected to a 16-point output card in slot #6 of the PLC shows the number of cars in the lot currently-If the parking lot is full, a No Vacancy light is turned on and off at a frequency of 0.5Hz at 70% duty cycle and no more cars are allowed to enter the lot R. Khan Nov. 2009...
View Full Document
- Fall '10