This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: Home | Map | Projects | Construction | Soldering | Study | Components | 555 | Symbols | FAQ | Links Adjustable 1-10 Minute Timer Project A kit for this project is available from RSH Electronics . Download PDF version of this page The circuit starts timing when switched on. The green LED lights to show that timing is in progress. When the time period is over the green LED turns off, the red LED turns on and the bleeper sounds. The time period is set by adjusting the variable resistor. It can be adjusted from 1 to 10 minutes (approximately) with the parts shown in the diagram. You can mark the times on a scale drawn on the box. Please note that the range of time periods is only approximate. With perfect components the maximum time period should be 4½ minutes, but this is typically extended to about 10 minutes because the 220µF timing capacitor slowly leaks charge. This is a problem with all electrolytic capacitors, but some leak more than others. In addition the actual value of electrolytic capacitorscapacitors, but some leak more than others....
View Full Document
This note was uploaded on 03/31/2012 for the course ECE 101 taught by Professor X during the Spring '12 term at Florida A&M.
- Spring '12