Project Second Assignment - SP 11

Project Second Assignment - SP 11 - Simulator Project...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Simulator Project Second Assignment 0 Work alone or you can have a group of 2 for this project Step 1 - Use your results from Project Step 1. Configure a second 7-segment display and connect it to port C Even though you can reload your code from Step 1 and modify it, then save it for Step 2, you will need to invoke and configure a 7-segment display for port B. Step 2 – The code For port B you must the address is $1004 For Port C the port address is $1003. However, Port C is a bidirectional port and must be configured before it can be used. The Port C configuration register is at address $1007. Before using Port C you must set the bits in this register to configure the port. Note: Port B is an output port so a configuration register is not needed. Configure Port C connecting the corresponding segment to the port pin. 7 Segment Display and bit position of the segnet The bit position of the segment of the display relates to the bit position it is connected to.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 2

Project Second Assignment - SP 11 - Simulator Project...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online