This preview shows page 1. Sign up to view the full content.
SSP 30256:001, Revision F February 7, 1997 3 – 18 Figures 18.104.22.168–1 through 22.214.171.124–3 show the Micro TM to bolt and torque reaction point interfaces. The Micro TM can accommodate 7/16 in. boltheads which are recessed below the top surface of the Micro interface under the specific conditions identified in Figure 126.96.36.199–1. Figure 188.8.131.52–2 defines the conditions for interfacing a Micro with a flush mounted EVA compatible bolt and Figure 184.108.40.206–3 the conditions for interfacing a Micro with a protruding EVA compatible bolt. The MCF TM accommodates both flush and protruding 7/16 in. and protruding 5/8 in. boltheads with the MCF reaction interface as shown in Figures 220.127.116.11–4 through 18.104.22.168–6. The MCF TM cannot accommodate bolts which are recessed below the top surface of the MCF. Figures 22.214.171.124–4 and 126.96.36.199–5 show MCF TM to 7/16 in. bolthead and torque reaction point interfaces. Figure 188.8.131.52–6 shows the MCF TM to 5/8 in. bolthead and torque reaction point interfaces.
This is the end of the preview. Sign up to access the rest of the document.
This document was uploaded on 04/09/2012.
- Spring '09