SCB-68 Connector Block

Figure 1 1 shows where to apply the quick reference

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: inside cover of the SCB-68. Table 1-1. Device-Specific Hardware Configuration Device Cable Assembly E Series Devices 68-Pin Devices (except DAQCards) SH68-68-EP, SH68-68-R1-EP, R6868 Direct feedthrough only Thermocouple measurements Open thermocouple detection Current input Filtering Voltage dividers AC coupling Direct feedthrough only Thermocouple measurements Open thermocouple detection Current input Filtering Voltage dividers AC coupling Features 100-Pin Devices SH1006868 SCB-68 Shielded Connector Block User Manual 1-2 ni.com Chapter 1 Introduction Table 1-1. Device-Specific Hardware Configuration (Continued) Device NI 6024E for PCMCIA (DAQCard-6024E), NI 6036E for PCMCIA (DAQCard-6036E), NI 6062E for PCMCIA (DAQCard-6062E) NI 6012E for PCMCIA (DAQCard-AI-16XE-50), NI 6041E for PCMCIA (DAQCard-AI-16E-4) Cable Assembly SCH68-68-EP, RC68-68 Features Direct feedthrough only Thermocouple measurements Open thermocouple detection Current input Filtering Voltage dividers AC coupling Direct feedthrough only Thermocouple measurements Open thermocouple detection Current input Filtering Voltage dividers AC coupling PSHR68-68, PR68-68F Analog Output (AO) Devices NI 670X for PCI/PXI/CompactPCI NI 671X/673X for PCI/PXI/CompactPCI NI 6715 for PCMCIA (DAQCard-6715) SH68-68-D1 R6868 SH68-68-EP SH68-68-R1-EP R6868 SHC68-68-EP RC6868 Digital I/O (DIO) Devices NI 6533 for ISA/PCI/PXI/CompactPCI NI 6533 for PCMCIA (DAQCard-6533), NI 6534 for PCI/PXI/CompactPCI SH68-68-D1 R6868 PSHR68-68-D1, PR6868F SH68-68-D1 R6868 Real-Time (RT) Devices NI 7030/6030E for PCI/PXI/CompactPCI, NI 7030/6040E for PCI/PXI/CompactPCI SH68-68-EP SH68-68R1-EP, R6868 Direct feedthrough only Thermocouple measurements Open thermocouple detection Current input Filtering Voltage dividers AC coupling Direct feedthrough only Direct feedthrough only Direct feedthrough only Direct feedthrough only Direct feedthrough only RC filtering Direct feedthrough only RC filtering Direct feedthrough only RC filtering NI 7030/6533 for PCI/PXI/CompactPCI SH68-68-D1 R6868 National Instruments Corporation 1-3 SCB-68 Shielded Connector Block User Manual Chapter 1 Introduction Table 1-1. Device-Specific Hardware Configuration (Continued) Device Cable Assembly S Series Devices NI 6110/6111 for PCI SH68-68-EP SH68-68R1-EP, R6868 SH68-68-EP SH68-68R1-EP, R6868 Timing I/O (TIO) Devices NI 6601/6602 for PCI/PXI/CompactPCI SH68-68-D1, R6868 Other Devices NI 250X for PXI/CompactPCI NI 4350 for PCMCIA (DAQCard-4350), NI 4350 for USB SH68-68 SH68-68 Direct feedthrough only Not recommended for use with the SCB-68 To maximize the available features, NI recommends using this DAQ device with the CB-68T, TBX-68, or TBX-68T terminal blocks. SH68-68 Not recommended for use with the SCB-68 To maximize the available features, NI recommends using this DAQ device with the CB-68T, TBX-68, or TBX-68T terminal blocks. NI 445X for PCI NI 455X for PCI NI 5411 for PCI/PXI/CompactPCI NI 5431 for PCI/PXI/CompactPCI SHC50-68 SHC50-68 SHC50-68 SHC50-68 Direct feedthrough only Direct feedthrough only Direct feedthrough only Direct feedthrough only Direct feedthrough only Direct feedthrough only Features NI 6115/6120 for PCI/PXI/CompactPCI Direct feedthrough only NI 4351 for PCI/PXI/CompactPCI SCB-68 Shielded Connector Block User Manual 1-4 ni.com Chapter 1 Introduction 1 2 3 9 10 4 5 6 8 7 1 2 3 Quick Reference Label Cover 68-Pin Connector Screws 4 5 6 7 Lock Washers 8 Strain-Relief Bars Shielding Screws 9 Strain-Relief Screws 68-Pin I/O Connector 10 Circuit Card Assembly Base Figure 1-1. SCB-68 Parts Locator Diagram Installing Cables The following sections describe how to cable one or more SCB-68 connector blocks to a DAQ device using 68-pin or 100-pin cables. Note For the I/O connector pinout of the DAQ device, refer to the device user manual at ni.com/manuals or to the quick reference label provided with the DAQ device. Using 68-Pin Cables Table 1-1 lists the 68-pin cable assemblies that can connect the SCB-68 to a 68-pin DAQ device. Each end of these 68-pin cables has a 68-pin I/O connector that you can connect to the SCB-68 and to the 68-pin DAQ device. In this configuration, the I/O connector pinout on the DAQ device determines the I/O connector pinout on the SCB-68. National Instruments Corporation 1-5 SCB-68 Shielded Connector Block User Manual Chapter 1 Introduction Figure 1-2 shows how to use a 68-pin cable to connect the SCB-68 to a 68-pin DAQ device. 1 5 1 2 3 68-Pin Cable Assembly 68-Pin DAQ Device 68-Pin I/O Connector 4 4 5 3 68-Pin I/O Connector SCB-68 Connector Block 2 Figure 1-2. Connecting a 68-Pin DAQ Device to an SCB-68 Using 100-Pin Cables You can use the SH1006868 cable assembly to connect two SCB-68 connector blocks to a 100-pin DAQ device. The SH1006868 is Y-shaped, with a 100-pin male connector on one end and two 68-pin female connectors on the opposite end. The DAQ device connects to the 100-pin cable connector, and an SCB-68 can connect to each 68-pin cable connector. Figure 1-3 shows how use the SH1006868 to cable a 100-pin DAQ device to two SCB-68 devices. SCB-68 Shielded Conn...
View Full Document

Ask a homework question - tutors are online