SCB-68 Connector Block

Figure 1 3 shows how use the sh1006868 to cable a 100

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ector Block User Manual 1-6 ni.com Chapter 1 Introduction 3 1 2 5 4 1 2 3 SCB-68 Connector Blocks 68-Pin I/O Connectors SH1006868 Cable Assembly 4 5 100-Pin DAQ Device 100-Pin I/O Connector Figure 1-3. Connecting a 100-Pin DAQ Device to Two SCB-68 Connector Blocks When you attach two SCB-68 devices to the SH1006868 cable, one of the SCB-68 connector blocks has a full 68-pin I/O connector pinout, and the other SCB-68 connector block has an extended AI or extended digital pinout. Each 68-pin end of the SH1006868 cable has a label that indicates which I/O connector pinout is associated with that 68-pin I/O connector. Figure 1-4 shows the pin assignments for the I/O connector on a 68-pin E Series device. This connector is available when you use the SH68-68-EP or R6868 cable assemblies with an E Series DAQ device. It is also one of two 68-pin connectors available when you use the SH1006868 cable assembly with a 100-pin E Series DAQ device. National Instruments Corporation 1-7 SCB-68 Shielded Connector Block User Manual Chapter 1 Introduction ACH8 ACH1 AIGND ACH10 ACH3 AIGND ACH4 AIGND ACH13 ACH6 AIGND ACH15 DAC0OUT1 DAC1OUT1 EXTREF3 DIO4 DGND DIO1 DIO6 DGND +5V DGND DGND PFI0/TRIG1 PFI1/TRIG2 DGND +5V DGND PFI5/UPDATE* PFI6/WFTRIG DGND PFI9/GPCTR0_GATE GPCTR0_OUT FREQ_OUT 1 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 ACH0 AIGND ACH9 ACH2 AIGND ACH11 AISENSE ACH12 ACH5 AIGND ACH14 ACH7 AIGND AOGND2 AOGND2 DGND DIO0 DIO5 DGND DIO2 DIO7 DIO3 SCANCLK EXTSTROBE* DGND PFI2/CONVERT* PFI3/GPCTR1_SOURCE PFI4/GPCTR1_GATE GPCTR1_OUT DGND PFI7/STARTSCAN PFI8/GPCTR0_SOURCE DGND DGND No connect on the DAQCard-AI-16E-4, DAQCard-AI-16XE-50, NI PCI-6023E, NI PCI-6032E, NI PCI-6033E, and NI PCI-6034E No connect on the DAQCard-AI-16E-4 and DAQCard-AI-16XE-50 No connect on the DAQCard-AI-16E-4, DAQCard-AI-16XE-50, DAQCard-6024E, NI PCI-6023E, NI PCI-6024E, NI PXI-6030E, NI PXI-6031E, NI PCI-6032E, NI PCI-6033E, NI PCI-6034E, NI PCI-6035E, NI PCI-6036E, PCI-MIO-16XE-10, and PCI-MIO-16XE-50 2 3 Figure 1-4. SCB-68 E Series I/O Connector Pinout (Full) SCB-68 Shielded Connector Block User Manual 1-8 ni.com Chapter 1 Introduction Figure 1-5 shows the pin assignments for the extended AI connector. This pinout shows the other 68-pin connector when you use the SH1006868 cable assembly with an NI 6031E, NI 6033E, or NI 6071E. ACH24 ACH17 ACH18 ACH27 ACH20 ACH21 ACH30 ACH23 ACH32 ACH41 ACH34 ACH35 AIGND ACH44 ACH37 ACH38 ACH47 ACH48 ACH49 ACH58 ACH51 ACH52 ACH61 ACH54 ACH55 NC NC NC NC NC NC NC NC NC 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 ACH16 ACH25 ACH26 ACH19 ACH28 ACH29 ACH22 ACH31 ACH40 ACH33 ACH42 ACH43 AISENSE2 ACH36 ACH45 ACH46 ACH39 ACH56 ACH57 ACH50 ACH59 ACH60 ACH53 ACH62 ACH63 NC NC NC NC NC NC NC NC NC NC = No Connect Figure 1-5. SCB-68 E Series I/O Connector Pinout (Extended AI) National Instruments Corporation 1-9 SCB-68 Shielded Connector Block User Manual Chapter 1 Introduction Figure 1-6 shows the pin assignments for the extended digital connector. This pinout shows the other 68-pin connector when you use the SH1006868 cable assembly with an NI 6025E or the NI 6021E (AT-MIO-16DE-10) for ISA. GND PC6 PC5 GND PC3 PC2 GND PC0 PB7 GND PB5 PB4 GND GND PB1 PB0 GND PA6 PA5 GND PA3 PA2 GND PA0 +5V NC NC NC NC NC NC NC NC NC 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 PC7 GND GND PC4 GND GND PC1 GND GND PB6 GND GND PB3 PB2 GND GND PA7 GND GND PA4 GND GND PA1 GND GND NC NC NC NC NC NC NC NC NC NC = No Connect Figure 1-6. SCB-68 E Series I/O Connector Pinout (Extended Digital) SCB-68 Shielded Connector Block User Manual 1-10 ni.com Chapter 1 Introduction Configuring the SCB-68 For instructions about using Measurement & Automation Explorer (MAX) to configure the SCB-68 as an accessory for a DAQ device, complete the following steps: 1. 2. 3. Navigate to MAX by selecting StartProgramsNational InstrumentsMeasurement&Automation. Select HelpHelp TopicsNI-DAQ in MAX. Select DAQ DevicesConfiguring DAQ DevicesConfiguring DAQ DevicesAccessory in the Measurement & Automation Explorer Help for MAX. Safety Information The following section contains important safety information that you must follow when installing and using the SCB-68. Do not operate the SCB-68 in a manner not specified in this document. Misuse of the SCB-68 can result in a hazard. You can compromise the safety protection built into the SCB-68 if the device is damaged in any way. If the SCB-68 is damaged, return it to NI for repair. Do not substitute parts or modify the SCB-68 except as described in this document. Use the SCB-68 o...
View Full Document

This note was uploaded on 05/19/2012 for the course ELEN 3030 taught by Professor Joshi during the Spring '12 term at Marquette.

Ask a homework question - tutors are online