# 6 circuit analysis can be carried out using pspice 7

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: application of Kirchhoff ’s current law at the nonreference nodes. (It is applicable to both planar and nonplanar circuits.) We express the result in terms of the node voltages. Solving the simultaneous equations yields the node voltages. 2. A supernode consists of two nonreference nodes connected by a (dependent or independent) voltage source. 3. Mesh analysis is the application of Kirchhoff ’s voltage law around meshes in a planar circuit. We express the result in terms of mesh currents. Solving the simultaneous equations yields the mesh currents. 4. A supermesh consists of two meshes that have a (dependent or independent) current source in common. 5. Nodal analysis is normally used when a circuit has fewer node equations than mesh equations. Mesh analysis is normally used when a circuit has fewer mesh equations than node equations. 6. Circuit analysis can be carried out using PSpice. 7. DC transistor circuits can be analyzed using the techniques covered in this chapter. REVIEW QUESTIONS | At node 1 in the circuit in...
View Full Document

## This note was uploaded on 07/16/2012 for the course KA KA 2000 taught by Professor Bkav during the Spring '12 term at Cambridge.

Ask a homework question - tutors are online