# 4 design for tappet screw the adjustable tappet screw

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: = × 2460 × 24 24 24 = 12 300 N–mm ...(∵ t2 = l2 / 2) = Fig. 32.27 Internal Combustion Engine Parts n 1199 and section modulus of the pin, π π (d 2 )3 = (18)3 = 573 mm3 32 32 ∴ Bending stress induced in the pin Z= M 12 300 = = 21.5 N/mm 2 or MPa 573 Z This bending stress induced in the pin is within permissible limits. Since the radial thickness of eye (t3) is taken as d2 / 2, therefore, overall diameter of the eye, D2 = 2 d2 = 2 × 18 = 36 mm The outer diameter of the roller is taken slightly larger (atleast 3 mm more) than the outer diameter of the eye. In the present case, 42 mm outer diameter of the roller will be sufficient. Providing a clearance of 1.5 mm between the roller and the fork on either side of the roller, we have = t2 + 2 × 1.5 2 12 + 3 = 39 mm = 24 + 2 × 2 3. Design for rocker arm cross-section The cross-section of the roker arm is obtained by considering the bending of the sections just near the boss of fulcrum on both sides, such as section A – A and B –...
View Full Document

{[ snackBarMessage ]}

Ask a homework question - tutors are online