110 festo didactic gmbh co kg fp 1110 7 ultrasonic

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: y sensors as a rule are equipped with a light emitting diode for status indication and very often with a potentiometer for setting of the operating range. There are also designs with two potentiometers for setting a switching window as well as special programmable designs, with which different operating ranges can be selected via an electronic interface. Some ultrasonic proximity sensors are equipped with synchronised inputs, whereby trouble free and alternating operation is possible if several adjacent proximity sensors are used. 110 © Festo Didactic GmbH & Co. KG • FP 1110 7. Ultrasonic proximity sensors 7.3 Notes on application 7.3.1 Minimum distances With the installation of ultrasonic proximity sensors, as with that of inductive and capacitive sensors, different minimum distances must be observed between adjacent proximity sensors. When assembling ultrasonic proximity sensors without the option for synchronisation, make sure that mutual influence of the proximity sensors does not occur. Observe the following listed minimum distances in relation to the detection range of the proxi...
View Full Document

This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.

Ask a homework question - tutors are online