22 technical characteristics the table below lists

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: However, they have the advantage that in view of the absence of electrical switching contacts, contact burn-out cannot occur. 2 1 Supply port (1) Working or output lines (2) Exhaust (3) Fig. 2.2.1: Pneumatic position sensor (micro-stem valve) © Festo Didactic GmbH & Co. KG • FP 1110 31 2. Mechanical position switches 2.2.2 Technical characteristics The table below lists the key technical data relating to mechanical-pneumatic position sensors. The figures listed in this table are typical examples and merely provide an overview. Parameter Value Working pressure -95 – +800 kPa (-0.95 – 8.0 bar) Temperature range -10 – +60 °C Actuating force at 6 bar operating pressure 6 – 10 N Switching point pressure-dependent, varies max. 0.8 mm within pressure range of 0 – 800 kPa (0 – 8 bar) Table 2.2.1: Technical characteristics of a mechanical-pneumatic position sensor 2.2.3 Notes on application These limit switches are preferably for use in areas of application where pneumatic components are already in u...
View Full Document

{[ snackBarMessage ]}

Ask a homework question - tutors are online