5 07 mm 3 if the liquid in the container moves for

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: to occur during switching on. These may be above the permissible operating voltage of the proximity sensor used and can lead to its failure. A simultaneous "connecting to ground" of the normally open and normally closed contact can also lead to failure. To provide short-circuit protection, the output of the proximity sensor is pulsed. With simultaneous "connecting to ground" of the two inverted outputs, the short circuit is constantly cancelled on one output and created again on the other. This causes overloading and thus failure of the proximity sensor. © Festo Didactic GmbH & Co. KG • FP 1110 263 16. Solutions Exercise 6.6 Filling level measurement by means of optical proximity sensors 1. Through-beam sensors, retro-reflective sensors, through-beam sensors with fibre-optic cables. 2. yes ∆h α Fig. 16.5.2: Response accuracy The proximity sensor responds when the height of the filling level is within a certain range. The width of the response range ∆h is depende...
View Full Document

This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.

Ask a homework question - tutors are online