8 use of optical proximity sensors in car washes a

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: e for a proximity sensor or fibre-optic cable to be mounted. The workpiece is made of plastic and has a matt lateral sawn edge as well as a smooth reflecting surface. The slide is made of matt aluminium. Which solution can you recommend? 1 a b 2 Workpiece (1) Workpiece carrier (2) Through-beam sensor with fibre-optic cable (a – b) Fig. 6.6.2: Interrogation by means of a through-beam sensor with fibre-optic © Festo Didactic GmbH & Co. KG • FP 1110 103 6. Optical proximity sensors Exercise 6.8 Use of optical proximity sensors in car washes A decision is to be made as to whether optical proximity sensors can be used for car washes to control movement of the drying nozzle as shown in the illustration below. After the car has been washed, a gantry bearing the drying nozzle which extends across the width of the car, traces the contours of the car. The task of the proximity sensors is to ensure that the drying nozzle constantly follows the contour of the car at a certain distance. The proximity sensors may be splashed by water during the preceding wash cycle. Which type of proximi...
View Full Document

This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.

Ask a homework question - tutors are online