Unformatted text preview: utput, the output is connected to the
negative potential in the switched state. This means that if a load is connected
(display, relay, ...), one connection is connected to the proximity sensor output and
the other connection to the positive potential. BN(1) BK(4) BU(3) +24 V DC L 0V Load (L) Fig. 10.2.4: NPN output (The purpose of the diodes is to provide a protective circuit) In the same way, one differentiates between "normally closed" and "normally
open" with NPN proximity sensors. © Festo Didactic GmbH & Co. KG • FP 1110 147 10. Connection and circuit technology L Load (L) Fig. 10.2.5: NPN normally open contact L Load (L) Fig. 10.2.6: NPN normally closed contact 10.3
Circuit technology Usually, logic operations of the proximity sensor are carried out by the controller. By
means of series or parallel connections it is possible to achieve the logic operation
of several sensors. 10.3.1 Parallel and series connection of proximity sensors
With parallel connection, it is possib...
View Full Document
This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.
- Spring '12