If two ultrasonic proximity sensors are opposite one

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: mity sensors used. These values apply if the object to be tested is moved in front and vertically to the proximity sensor. The values indicated merely provide examples. Deviations may occur depending on type and manufacturer's instructions. Detection range [cm] Typical minimum distance [cm] 6 – 30 >15 20 – 100 >60 80 – 600 >250 Table 7.3.1: Lateral minimum distance between two parallel ultrasonic proximity sensors Under other operating conditions, the minimum distances are established experimentally for the respective assembly. If two ultrasonic proximity sensors are opposite one another, then the values given in the table below are to be observed. Detection range [cm] Typical minimum distance [cm] 6 – 30 >120 20 – 100 >400 80 – 600 >2500 Table 7.3.2: Minimum distances between opposing ultrasonic proximity sensors © Festo Didactic GmbH & Co. KG • FP 1110 111 7. Ultrasonic proximity sensors In cases where a wall or other reflecting objects are adjacent to an ultrasonic sensor, the following values apply: Detection range [cm] Typical minimum distance [cm] 6 – 30 >3 20 – 100 >15 80 – 600 >40 Table 7.3.3:...
View Full Document

This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.

Ask a homework question - tutors are online