Kg fp 1110 14 standards and protection classes 1 d3

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 4.3.3 Numerical designation to EN 50 044 This differentiates between polarised and non-polarised proximity sensors. For non-polarised proximity sensors, terminals 3 and 4 have the normally open contact function and terminals 1 and 2 the normally closed function. For polarised proximity sensors for direct current with two terminals, the positive terminal must be identified with 1, the negative terminal with number 3. Number 4 is for the normally open contact function and number 2 for the normally closed function. 14.4 Designs of proximity sensors 218 The designs for inductive proximity sensors are laid down in European standards. Many manufacturers offer all of these design types as well as their own designs which differ from these standards. Standard EN 50 008 specifies the dimensions for cylindrical proximity sensors (design A). In addition, the minimum values for nominal switching distances and switching frequencies which must be achieved are indicated below. © Festo Didactic GmbH & Co. KG • FP 1110 14. Standards and protection classes 1 d3 d1 d2 2 l3 m sn m l1 l2 Calibrating pla...
View Full Document

This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.

Ask a homework question - tutors are online