Kg fp 1110 2 mechanical position switches fig 223

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: se. In this case, the supply of compressed air required for the switches is already available and a conversion of the switch output into an electrical value is not necessary. 2.2.4 Examples of application stroke Fig. 2.2.2: Reversing of a double-acting cylinder by means of adjustable position sensors 32 © Festo Didactic GmbH & Co. KG • FP 1110 2. Mechanical position switches Fig. 2.2.3: Auxiliary function for lifting of thin workpieces 2.3 Exercises Exercise 2.1 Protective circuits for electro-mechanical limit switches Describe the different types of load which can occur with the connection of a limit switch. You do not need to take into account mixed types of load. Indicate the different options of protective circuits. Exercise 2.2 Switching with low electrical power A limit switch is to be used for switching very low power. The voltage is approx. 5 V DC, the current is less than 1 mA. At this level even the smallest amounts of dirt on the contacts can to lead to faults. Suggest a circuit, which overcomes this problem. © Festo Didactic GmbH & Co. KG • FP 1110 33 34 © Festo Didactic GmbH & Co....
View Full Document

This note was uploaded on 11/01/2012 for the course CHEMICAL 102 taught by Professor Jamesrodriguez during the Spring '12 term at Universidad Politécnica de Cartagena.

Ask a homework question - tutors are online