Stop playback or recording and try again file

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: back or recorded on the calculator. Stop playback or recording and try again. File Extension Error The file you selected has an invalid file name extension. Make sure that the extension of the file you are selecting is bmp or jpg. <path> Invalid Extension The file path you selected has an invalid file name extension. Make sure that the extension of the file path you are selecting is bmp or jpg. A problem occurred while Some problem occurred during accessing the registry. registry access. Check to make sure that the emulator is installed correctly. A system error has occurred. A system error occurred. Exit the emulator and restart it. If this does not correct the problem, it could mean that the emulator file is damaged. Reinstall the emulator. E-45 Re-installation of the emulator is recommended. Re-installation of the emulator is recommended. Message Invalid File Name Description You specified an invalid file name. Required Action Make sure that you are specifying the file name correctly. Invalid Folder Name You specified an invalid folder name. Make sure that you are specifying the folder name correctly. Too Many Files Selected The number of files you Reduce the number of selected exceeds the allowable selected files. limit. k Screen Receiver Message Description Required Action A connection could not be established. Either the calculator is not connected or the connected calculator is not in the OHP Mode. Correct the problem and try again. For details, select the following on the menu bar: Help Manual - Manager PLUS, or refer to the Manager PLUS user’s guide. You started a data communication operation while the USB cable was not connected. Check for proper connection of the calculator to the computer and confirm that the calculator is in the OHP mode. Then try again. See “10. Using Screen Receiver to Display the Calculator Screen Image on Your Computer” for details. A problem occurred during Some problem occurred during communication. data communication. Disconnect the USB cable, check the setup of the calculator, and try again. For details, select the following on the menu bar: Help Manual - Manager PLUS, or refer to the Manager PLUS user’s guide. Disconnect the USB cable and check the setup of the calculation. Then try again. See “10. Using Screen Receiver to Display the Calculator Screen Image on Your Computer” for details. Multiple calculators have been Multiple calculators are detected. connected to the computer. To start communication, make sure there is a USB connection with a single calculator. Make sure that there is only one USB connection to a single calculator before starting communication. See “10. Using Screen Receiver to Display the Calculator Screen Image on Your Computer” for details. E-46 Message The image could not be sent from the calculator. (1) Try pressing a key on the calculator. (2) Check to make sure that the calculator is in the OHP Mode. If the screen is not sent after you perform the above steps, disconnect the USB cable and check the calculator setup. Next, reconnect and try again. For details, select the following on the menu bar: Help Manual - Manager PLUS, or refer to the Manager PLUS user’s guide. The connection has been broken for some reason and is being restored. If data communication does not resume after some time, perform the operation described below. Try pressing a key on the calculator. If the screen is not sent after you perform the above steps, disconnect the USB cable and check the calculator setup. Next, reconnect and try again. For details, select the following on the menu bar: Help - Manual - Manager PLUS, or refer to the Manager PLUS user’s guide. Description The calculator screen image cannot be sent for some reason. Required Action Follow the steps that are shown on the display and try again. See “10. Using Screen Receiver to Display the Calculator Screen Image on Your Computer” for details. Follow the steps that are shown on the display and try again. — E-47 CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan SA0606-A...
View Full Document

This note was uploaded on 03/10/2013 for the course ECON 101 taught by Professor Ramiz during the Spring '11 term at Abilene Christian University.

Ask a homework question - tutors are online