median filter b3 p 3 point c5 p 5 point note

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: channel • Note that the above options appear only when real-time sampling is turned on (by pressing 1(YES) for the Real-Time item). (4) Filter Settings (Filter) • 1 (None) ....... No setting • 2 (S-G) ......... S-G Smoothing b(5-p): 5-point c(9-p): 9-point d(17-p): 17-point e(25-p): 25-point • 3 (MED) ....... Median Filter b(3-p): 3-point c(5-p): 5-point • Note that the above options appear only when real-time sampling is turned off (by pressing 2(NO) for the Real-Time item). 3. After all the settings are the way you want, press w to return to the Advanced Setup menu. u To configure a custom probe You can use the procedures in this section to configure a custom probe* 1 for use with the EA-100. Creating a New Custom Probe Configuration To configure a custom probe, you must input values for the constants of the fixed linear transformation formula (ax + b). The required constants are slope ( a) and intercept (b). x in the above expression (ax + b) is the sampled voltage value (sampling range: 0 to 5 volts). You can use either of the two following procedures to create a new custom probe configuration while creating an EA-100 setup using Advanced Setup. * 1 The term “custom probe” means any sensor other than the CASIO or VERNIER sensors specified as standard for the E-CON Mode. 20011101 20010101 4-2-12 EA-100 Setup • To configure a custom probe starting from the Advanced Setup menu 1. From the E-CON main menu, press 1 (SETUP) and then c(Advan) to display the Advanced Setup menu. • See “Creating an EA-100 Setup Using Advanced Setup” on page 4-2-4 for more information. 2. On the Advanced Setup menu, press f(Custom Probe) to display the Custom Probe List. • The message “No Custom Probe” appears if the Custom Probe List is empty. 3. Press 2(NEW). • This displays the screen for inputting the name of the new custom probe. 4. Input up to 18 characters for the custom probe name, and then press w . • This displays the screen for configuring a new custom probe. 5. Use the function key operation...
View Full Document

This note was uploaded on 03/17/2013 for the course EE 410 taught by Professor Ertuğruleriş during the Spring '13 term at Istanbul Kültür Üniversitesi.

Ask a homework question - tutors are online