If you did not specify photogate a screen for setting

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: er or not you specified “Photogate” as the sensor. • If you did not specify “Photogate,” a screen for setting the sampling interval appears after step 4. 1. Use the number keys to input the sampling interval. • Inputting a value in the range of 0.52 to 300 enables real-time sampling. Inputting a value outside this range enables non-real-time sampling. 2. Press w . • If you specified “Photogate” as the sensor, a screen for setting the sampling timing appears after step 4. 1. Press either 1 (Open) or 2 (Close) to specify the sampling timing. Pressing either key advances to a screen for setting the time recording method. • See online help (GATE TRIGGER STATUS HELP) for details about the Open and Close settings. 2. Press 1(Abs) or 2(Rel) to specify the sampling time recording method. 20010101 4-2-3 EA-100 Setup 6. After you complete step 5, a screen for setting the number of samples appears on the display. • Use the number keys to input the number of samples, and then press w . 7. After you complete step 6, a screen like the one shown below appears on the display. • Press one of the function keys described below to specify what you want to do with the setup you have created with the above steps. • 1 (YES) ........ Starts sampling using the setup (page 4-5-1). • 2 (NO) .......... Returns to the E-CON main menu (page 4-1-1). • 3 (SAVE) ...... Saves the setup (page 4-3-1). • 4 (PRGM) ..... Converts the setup to a program (page 4-4-1). • Pressing 2(NO) in step 7 returns to the E-CON main menu and stores the setup in the E-CON Mode’s current setup memory area. You can use the following function key operations from the E-CON main menu to manipulate the contents of the current setup memory area. • 2 (MEM), then 2(SAVE) ....................... Saves the current setup memory area setup (page 4-3-1). • 3 (PRGM) ..... Converts the setup in the current setup memory area to a program (page 4-4-1). • 4 (START) .... Starts sampling using the setup in the current setup memory area (page 4-5-1). • Pressing 1(SETUP) and then c (Advan) displays an Advanced Setup...
View Full Document

This note was uploaded on 03/17/2013 for the course EE 410 taught by Professor Ertuğruleriş during the Spring '13 term at Istanbul Kültür Üniversitesi.

Ask a homework question - tutors are online