Greenhouses. Planning A Home Greenhouse

3 rigid frame the rigid frame structure has vertical

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ypes of greenhouses allow many options. 3 Rigid-frame. The rigid-frame structure has vertical sidewalls and rafters for a clear-span construction: There are no columns or trusses to support the roof. Glued or nailed plywood gussets connect the sidewall supports to the rafters to make one rigid frame. The conventional gable roof and sidewalls allow maximum interior space and air circulation. A good foundation is required to support the lateral load on the sidewalls. Post and rafter and A-frame. The post and rafter is a simple construction of an embedded post and rafter, but it requires more wood or metal than some other designs. Strong sidewall posts and deep post embedment are required to withstand outward rafter forces and wind pressures. Like the rigid frame, the post and rafter design allows more space along the sidewalls and efficient air circulation. The A-frame is similar to the post and rafter construction except that a collar beam ties the upper parts of the rafters together. manage because temperatures in small greenhouses fluctuate more rapidly. Small greenhouses have a large exposed area through which heat is lost or gained, and the air volume inside is relatively small; therefore, the air temperature changes quickly in a small greenhouse. Suggested minimum sizes are 6 feet wide by 10 feet long for a lean-to and 8 or 10 feet wide by 12 feet long for an even-span or freestanding greenhouse. Structural Materials A good selection of commercial greenhouse frames and framing materials is available. The frames are made of wood, galvanized steel, or aluminum. Build-it-yourself greenhouse plans are usually for structures with wood or metal pipe frames. Plastic pipe materials generally are inadequate to meet snow and wind load requirements. Frames can be covered with glass, rigid fiberglass, rigid double-wall plastics, or plastic film. All have advantages and disadvantages. Each of these materials should be considered––it pays to shop around for ideas. Coverings Greenhouse coverings include long-life glass, fiberglass, rigid double-wall plastics, and film plastics with 1- to 3-year lifespans. The type of frame and cover must be matched correctly. Glass. Glass is the traditional covering. It has a pleasing appearance, is inexpensive to maintain, and has a high degree of permanency. An aluminum frame with a glass covering provides a maintenance-free, weathertight structure that minimizes heat costs and retains humidity. Glass is available in many forms that would be suitable with almost any style or architecture. Tempered glass is frequently used because it is two or three times stronger than regular glass. Small prefabricated glass greenhouses are available for do-it-yourself installation, but most should be built by the manufacturer because they can be difficult to construct. The disadvantages of glass are that it is easily broken, is initially expensive to build, and requires much better frame construction than fiberglass or plastic. A good foundation is required, and the frames must be strong and must fit well together to support heavy, rigid glass. Fiberglass. Fiberglass is lightweight, strong, and practically hailproof. A good grade of fiberglass should be used because poor grades discolor and reduce light penetration. Use only clear, transparent, or translucent grades for greenhouse construction. Tedlar-coated fiberglass lasts 15 to 20 years. The resin covering the glass fibers will eventually wear off, allowing dirt to be retained by exposed fibers. A new coat of resin is needed after 10 to 15 years. Light penetration is initially as good as glass but can drop off considerably over time with poor grades of fiberglass. Frames Greenhouse frames range from simple to complex, depending on the imagination of the designer and engineering requirements. The following are several common frames (Figure 3). Quonset. The quonset is a simple and efficient construction with an electrical conduit or galvanized steel pipe frame. The frame is circular and usually covered with plastic sheeting. Quonset sidewall height is low, which restricts storage space and headroom Gothic. The gothic frame construction is similar to that of the quonset but it has a gothic shape (Figure 3). Wooden arches may be used and joined at the ridge. The gothic shape allows more headroom at the sidewall than does the quonset. Rigid-frame Quonset A-frame Gothic Post and rafter Figure 3. Greenhouses can have a variety of different structural frames. 4 Double-wall plastic. Rigid double-layer plastic sheets of acrylic or polycarbonate are available to give long-life, heat-saving covers. These covers have two layers of rigid plastic separated by webs. The double-layer material retains more heat, so energy savings of 30 percent are common. The acrylic is a long-life, nonyellowing material; the polycarbonate normally yellows faster, but usually is protected by a UV-inhibitor coating on the exposed surface. Both materials carry warranties for 10 years on thei...
View Full Document

Ask a homework question - tutors are online