2CLabManual201303

0 ml to each of two other test tubes store the 30 ml

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: r bath. 3. In order to get correct color matches, it is important to use the same size test tubes for all tests in Parts I and II. Using a disposable pipet, transfer exactly 1.5 mL of the stock 0.050 M green chloro solution to one test tube and 3.0 mL to each of two other test tubes. Store the 3.0 mL solutions in an ice-water bath. 4. Prepare a similar but more dilute green chloro solution, about 0.010 M in the green chloro complex, by dissolving about 33 mg of trans-[Co(en)2Cl2]Cl in 12 mL of the 0.5 M sulfuric acid solution. Again, transfer one 1.5 mL and two 3.0 mL portions of the 0.01 M solution to separate test tubes. Store the two 3.0 mL solutions in an icebath. 5. Heat the two test tubes containing 1.5 mL of solution in a beaker of boiling water using a hot plate for 5 to 10 minutes. This treatment will effect complete conversion to the red aquo complex. Cool these two test tubes to room temperature, and to each solution add 1.5 mL from the two stock solutions you prepared containing the...
View Full Document

This note was uploaded on 04/09/2013 for the course CHE CHE 2C taught by Professor Nasiri during the Spring '07 term at UC Davis.

Ask a homework question - tutors are online