2CLabManual201303

Part i constructing a table of standard reduction

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: d to Student Judicial Affairs. Part I. Constructing a Table of Standard Reduction Potentials In this part of the experiment, you will be measuring the voltages of the several galvanic cells diagrammed below. In other words, you will be using the "V" scales of the meters (which you will find at the front of the laboratory.) Note that the meter display has both an algebraic sign and a magnitude. Throughout this experiment you should clip the "red" wire coming out of the meter to the "right hand" electrode of the cell in question. If the meter shows a "plus" voltage, reduction takes place at that electrode. If the displayed voltage is negative, oxidation is what really occurs at the "right hand" electrode of the cell as diagrammed. In most cases the cell electrolytes for Part I of the experiment will be 0.1 M stock solutions of the nitrate salts of the various cations. For the cell containing a mixture that is 0.1 M in both Fe2+ and Fe3+, you should mix together 1 mL volumes of the 0.2 M...
View Full Document

This note was uploaded on 04/09/2013 for the course CHE CHE 2C taught by Professor Nasiri during the Spring '07 term at UC Davis.

Ask a homework question - tutors are online