2CLabManual201303

Repeat this titration at least two more times

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: h indicator solution. You may approximate the 2/3 mL of 6 M acetic acid here by delivering between 0.5 and 0.75 mL of 6 M acetic acid, using a disposable pipet. As you approach the end point you should see the blue color form where the drop enters but go away again when the flask is swirled. Repeat this titration at least two more times. Analyzing commercial Vitamin C: Perform the above titration procedure at least three times using the" solution of the commercial Vitamin C tablet and thereby obtaining the data needed to compute the ascorbic acid content of this product. Part III. Investigation of degradative factors on ascorbic acid. Effect of Metal Ions Titrate a 10.00 mL aliquot of the ascorbic acid solution containing metal ions as well as titrate a 10.00 mL aliquot of the ascorbic acid solution containing metal ions plus the oxalic acid following the procedures given in Part II under Assaying your NBS solution. Repeat these titrations to obtain more accurate results by using another 10.00 mL aliquot if there is time. Clean-Up:...
View Full Document

This note was uploaded on 04/09/2013 for the course CHE CHE 2C taught by Professor Nasiri during the Spring '07 term at UC Davis.

Ask a homework question - tutors are online