Lab 2 Handout Mapping E-field-1

25v25vand375vbuttheoptimumwilldependonyourspecificshee

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ructor before turning anything on. Measurements 1. Use the left side of the power supply to provide a fixed 5.0V across the voltage divider. Measure the voltage between the power supply common and each of the tap points. Do these make sense? 2. For the concentric ring geometry, map out sets of equipotential points for two choices of voltages between roughly 1.5 V and 3.5 V. Each set should contain at least 10 points. What do you get when you connect the dots? 3. When the above measurements are complete, remove the conducting sheet with the concentric...
View Full Document

This note was uploaded on 05/06/2013 for the course PHYSICS 184 taught by Professor Menon during the Spring '13 term at UMass (Amherst).

Ask a homework question - tutors are online