1.6.1-packet-tracer---implement-a-small-network.docx -...

This preview shows page 1 - 2 out of 3 pages.

Packet Tracer - Implement a Small Network Addressing Table Device Interface Address Subnet Mask Default Gateway RTA RTA G0/0 10.10.10.1 255.255.255.0 N/A G0/1 10.10.20.1 255.255.255.0 N/A SW1 VLAN1 10.10.10.2 255.255.255.0 10.10.10.1 SW2 VLAN1 10.10.20.2 255.255.255.0 blank 10.10.20.1 PC-1 NIC 10.10.10.10 255.255.255.0 10.10.10.1 PC-2 NIC blank 10.10.20.10 255.255.255.0 blank 10.10.20.1 Objectives Part 1: Create the Network Topology Part 2: Configure Devices and Verify Connectivity Instructions Part 1: Create the Network Topology Step 1: Obtain the required devices. a. Click the Network Devices icon in the bottom tool bar. b. Click the router icon in the submenu. c. Locate the 1941 router icon. Click and drag the icon for the 1941 router into the topology area. d. Click the switch entry in the submenu. e. Locate the 2960 switch icon. Click and drag the icon for the 2960 switch into the topology area. f. Repeat the step above so that there are two 2960 switches in the topology area. g. Click the End Devices icon. h. Locate the PC icon. Drag two PCs to the topology area.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture