Unformatted text preview: lation with more than twenty (20) outlets or capacity of
more than a 4 Kw, of any voltage, application shall be accompanied by electrical
plans and specifications signed and sealed by a duly licensed Professional
Electrical Engineer, containing the following:
1. General electrical layout with legends
2. Single line diagram
3. Riser diagram
4. Schedule of loads
5. Design analysis
6. Estimate of Cost (for statistical purposes only) b) For addition and/or alteration of existing installation involving more than 20
outlets or more than 4 KW of any voltage applications shall be accompanied by
electrical plans and specifications signed and sealed by a duly licensed
Professional Electrical Engineer containing the following:
1. Design analysis of original service entrance equipment, main/feeder branch
together with the additional installation.
2. Riser diagram or original and additional installation.
3. Schedule of load of new installation.
4. General electrical layout with legends
5. Estimated cost of new installation and cost of modification (for statistical
c) For new, additional or altered electrical installation not exceeding twenty (20)
outlets or a capacity of a 4 KW up to 600 volts, application shall be accompanied
by a bill of materials and a sketch signed by at least a duly licensed Master
Electrician containing the following:
1. Single line diagram of electrical installations
2. General electrical layout, with legends
3. Bill of materials
4. Estimate of Cost (for statistical purposes only)
3.3 Logbook and standard drawing sheets.
3.4 Whenever necessary , written certifications/clearances shall be obtained from the various
government authorities exercising regulatory functions affecting buildings and other related
structures, such as the
Human Settlements Regulatory Commission (HSRC), for zoning and land use.
National Housing Authority (NHA), for subdivisions and residential condominiums:
National Pollution Control Commission (NPCC), for pollution abatement and control
Ministry of Tourism (MOT), for tourism oriented projects;
Civil Aeronautics Administration (CAA), for height clearance for constructions near
airports; Philippine Ports Authority (PPA), for constructions in port zones, etc. RULE II – PROCESSING OF APPLICATIONS FOR BUILDING PERMITS
AND CERTIFICATES OF OCCUPANCY Pursuant to Sections 303 to 306, and 309 of the National Building Code (PD 1096) the
following procedures shall be followed in the processing of applications for and issuance of Building
Permits and Certificates of Occupancy.
1. Building Permits
1.1 Verification of Land Use and Zoning Compatibility:
The Building Official shall first verify conformity of the proposed building/s or structure/s with
the land use plan and zoning regulations of the city/municipality. In the absence of an official
Land Use Plan or Zoning Regulations the Interim Guidelines provided in Section _________ of
this Rule shall be followed.
1.2 Filing of Application:
View Full Document
This note was uploaded on 09/22/2013 for the course ARIDBE AR taught by Professor Any during the Fall '12 term at Mapúa Institute of Technology.
- Fall '12