Unformatted text preview: hen performing the initiation, the
system either automatically assigns or not the JCN and MCN to the work
order. If no JCN is assigned, the work order will need to be listed on the
Maintenance Control JCN/WC Assignment (see "Maintenance Control
JCN/Work Center Assignment" on page 349) awaiting JCN.
The following topics describe procedures for initiating any work order
against aircraft, uninstalled equipment, SE, ALSS, or MME item. Itemspecific variances are included in these procedures.
Once a work order is initiated and assigned both JCN and MCN, it can
then be retrieved from the Active Work Order Query window to enter
data in each section.
When retrieving an existing work order, the system defaults to the Basic
Work Order Update window.
For procedures on establishing data, see Basic Work Order Update (on
1 Open the specific VED (see "Open a VED" on page 342). 2 On the VED, right-click the specific item icon in the ORG column or
the Modex or BUNO entry (for aircraft), or the Serno entry (for SE,
ALSS, or MME), and then select Initiate and the work order type.
3 For non-aeronautical equipment, right-click an icon from either SE or
ALSS, and then select Unscheduled Maintenance. 442 User Guide Optimized NALCOMIS OMA The appropriate window appears to enter data for the work order.
For procedures to initiate the selected work order type, see the applicable
topic listed under "In This Section." Initiate Recurring Work Order
Recurring work orders for non-aeronautical equipment, such as Local
Manufacture, may be initiated only from the ALSS, SE, and MME VED.
Additionally, the Assy Cd (ZAAA) must be entered in the Assy Cd box.
Only equipment in the OMA database will be available in the list boxes.
1 Open the specific VED (see "Open a VED" on page 342). 2 Right-click the item, choose Initiate, and select Recurring.
On the Recurring Work Order Selection window, the selected Modex
(for aircraft) or BUNO/Serno (for SE, ALSS, or MME) appears along
with the associated recurring work orders already existing in the
In both situations, the Assy Cd and BUNO/Serno fields are prefilled.
If you leave the WC and WUC/UNS fields blank, all recurring work
orders that pertain to either Modex or Assy Cd appear.
Note: If the recurring work order involves an assembly that is
installed on the end item (Aircraft/SE/ALSS/MME), click the
Assembly button to select the assembly code, for example Engine,
APU, or Propeller from the drop-down list that enables you to use the
appropriate WUC/UNS of the assembly vice the end item.
3 Check an option in the Up/Down/Partial Ind block.
4 If you want to sort the columns, click the Sort By button and follow
procedures in Sort (on page 139).
The system also displays the list of discrepancies for the selected
Modex or Assy Cd.
5 To select a discrepancy, select the item, go to the Actions menu, and
select Initiate Recurring WO or click the Initiate Recurring WO
button . The WUC/UNS Selec...
View Full Document
This note was uploaded on 10/01/2013 for the course ECON 101 taught by Professor Smith during the Fall '13 term at Voorhees.
- Fall '13