This preview shows page 1. Sign up to view the full content.
Unformatted text preview: Activates an inactive
configuration. Turn Eshadow
Logging On Activates Eshadow logon. Turn Eshadow
Logging Off Activates Eshadow logoff. # To add a new configuration:
1. Go to the Actions menu and select Add or click Add.
The system displays the Apply and Cancel Apply buttons.
2. Enter the data required for the configuration.
3. Check the applicable option for IMA System and SUP Interface
and click Apply.
-or4. To cancel the changes before saving, click Cancel Apply.
5. To save the new configuration, click Save. # To delete a configuration:
1. Select the configuration record, then go to the Actions menu and
select Delete or click Delete.
2. Click Yes on the prompt to confirm the delete action. 502 User Guide Optimized NALCOMIS OMA # To activate an existing inactive configuration:
Select the configuration record and click Set Active. # To view a configuration:
Select the configuration record and click View. # To activate or deactivate Eshadow:
1. To activate Eshadow, click Turn Shadow Logging On.
2. To deactivate Eshadow, click Turn Shadow Logging Off.
3. Eshadow logging automatically turns off after one hour. DDSN Range Update
This window enables you to access the DDSN table, which contains
document dates and serial numbers of NMCS & PMCS and non-NMCS
& PMCS requisitions. It enables you to enter the assigned document
number ranges for NMCS/PMCS and non-NMCS/PMCS requisitions.
These document numbers are automatically assigned and incremented
during electronic interface.
Note 1: In a multi-organization environment, each organization residing
in the same server must establish its own DDSN range.
Note 2: To turn off the DDSN auto-assign capability and work in the
manual mode, you must type three R's (RRR) in the NMCS/PMCS Next
Doc Assigned field, and four R's (RRRR) in the non-NMCS/PMCS Next
Doc Num Assigned fields.
Note 3: When on a detachment, you must change Rs' to read Ds' in the
fields where it calls for and establishes the DDSN Range as required by
the supporting supply activity.
Note 4: For the Cannibalization Wizard to work properly, the DDSN
auto-assign capability must be turned on.
1 Open the Material Selection Menu (see "How to Access Material
Control Subsystem" on page 495). 2 On the Material Selection Menu, click DDSN Range Update from
the Table Maintenance group list and click OK.
3 On the DDSN Range Update dialog box, select the appropriate
Organization Code if in a multi-org environment, if not, proceed to
the specific fields and update them as necessary.
4 To save the changes, go to the File menu and select Save or click
5 Click Close to return to the Material Selection Menu. Chapter 6 Material Control Subsystem 503 Project Code
This window enables you to access the Project Code tables to add,
update, or delete Project/Priority codes. These codes are used in
conjunction with the DDSN tables to determine the proper DDSN
assignment when ordering required material.
Note: In a multi-organization environment, each orga...
View Full Document
This note was uploaded on 10/01/2013 for the course ECON 101 taught by Professor Smith during the Fall '13 term at Voorhees.
- Fall '13