This preview shows page 1. Sign up to view the full content.
Unformatted text preview: tion Date on the Manual Flight Record).
This will set the numbers correctly in the Flight Summary tab of the
logset by period. While it is only required to enter the most current
Service Period information, you can create additional Service
Periods. If you want to enter additional Service Periods, follow this
process for each period.
3 To create a Manual Flight Document (MFLT) as data source for the
aircraft, see Create a Usage Record (on page 227).
Note: Ensure Manual Flight Documents are created as needed for
each assembly prior to installing the assembly on the aircraft
structure. # To update life limited components:
In the Inventory Explorer there are two methods of updating Serial
Numbers, verifying component part numbers and TSN/TSO values and
calculating forced removal deadlines for life-limited components; and
accessing the Inventory Properties for each item or by using the
Configuration Worksheet which allows multiple updates. For complex
structures it is recommended to use the Configuration Worksheet.
1 Using the paper Aircraft Logbooks and AESRs, review each MSR,
ASR, SRC and EHR card and follow the guidelines in the Update
Note: When entering the TSN/TSO for ASRs, you must use the
current assembly TSN when calculating Subassembly Service Record
(SASR) for that assembly. Chapter 2 Quick Reference Guide in Optimized NALCOMIS OMA 57 2 Explosive devices require additional verification and update of
information such as DODIC, lot number, container open date, etc. Go
to Inventory Properties for that explosive device using Modify
Inventory Properties (on page 213), and then select the Explosives
Tab to update this information. Updating the Expiration Date on the
Explosives Tab will automatically update the Deadline Date on the
Note: If an Explosive Device Lot Number is not available, contact
the OOMA Help desk through OOMASUPPORT or SMTS. # To update task and task plans:
During the create process Tasks that were built as ‘auto-create’ by the
Baseline Manager appears as Pending on the Inventory Explorer Tasks
Tab. Some tasks such as Preservation Inspections may not be visible at
all times, but need to be created when required and cancelled when no
longer needed. For more information, see Create a Task (on page 218)
and Cancel Task (on page 221).
1 Accessing the Inventory Explorer Tasks Tab allows you to set the
deadline date for upcoming tasks. Modifying Task Properties (see
"Modify Task Properties" on page 219) allows you to access each
task and enter the next due date in the Deadline Date for calendar
inspections or next time due in the Scheduled Expenditure box for
hourly inspections. Inspections based on counts or landings (such as
catapults, arrestments or rounds fired) also need the Scheduled
Expenditure box updated. 2 Task Plans are used for sequential inspections such as Phase
Inspections and are not automatically created during the create
inventory process. Using Task Plan Creation, create y...
View Full Document
- Fall '13