Mechanics of Materials Questions for HW #7

Mechanics of Materials Questions for HW #7 - Knowing that...

Info iconThis preview shows pages 1–6. Sign up to view the full content.

View Full Document Right Arrow Icon
6.2 Three boards, each 2 in. thick, are nailed together to form a beam that is subjected to a vertical shear. Knowing that the allowable shearing force in each nail is 150 lb, determine the allowable shear if the spacing s between the nails is 3in.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
6.4 A square box beam is made of two 20 x 80-mm planks and two 20x120-mm planks nailed together as shown. Knowing that the spacing between the nails is s = 30 mm and that the vertical shear in the beam is V = 1200 N, determine (a) the shearing force in each nail, (b) the maximum shearing stress in the beam.
Background image of page 2
6.30 The built-up timber beam is subjected to a vertical shear of 1200lb.
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 4
Background image of page 5

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 6
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Knowing that the allowable shearing force in the nails is 75lb, determine the largest permissible spacing s of the nails. 6.15 For the beam and loading show, determine the minimum required depth h, knowing that for the grade of timber used, all = 1750 psi and all = 130 psi. 6.22 For the beam and loading shown, consider section n-n and determine the shearing stress at (a) point a, (b) at point b. 6.23 For the beam and loading shown, determine the largest shearing stress in section n-n....
View Full Document

This note was uploaded on 04/07/2008 for the course ENSC 301 taught by Professor Nowak during the Spring '08 term at Gonzaga.

Page1 / 6

Mechanics of Materials Questions for HW #7 - Knowing that...

This preview shows document pages 1 - 6. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online