This preview shows page 1. Sign up to view the full content.
Unformatted text preview: ed Warranty. 50 52 appendix c: regulatory information The FCC Wants You to know
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is
provided (i.e., RJ11 C) in the packaging with each piece of approved terminal equipment. A plug and jack
used to connect this equipment to the premises wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the telephone provider. For products
approved after July 23,2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary. The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary modifications to maintain
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information. appendix c: regulatory information 53 If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of
this ooma system does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installed.
This equipment is hearing aid compatible.
DO NOT DISASSEMBLE THIS EQUIPMENT. It does not contain any user serviceable components. Changes
or modifications to this product not expressly approved by ooma, or operation of this product in any way other
than as detailed by the owner’s manual, could void your authority to operate this product.
Should you experience trouble with this equipment, please contact ooma customer service at 1-888-711-6662.
If the equipment is causing harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning
strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage
from these types of surges, a surge arrestor is recommended.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. 54 Appendix D: Technical Specifications 56 appendix d: technical specifications Size and Weight Power ooma Hub
Height: 55mm (2.25 in)
Width: 187.5mm (7.5 in)
Depth: 150mm (6 in)
Weight: 550g (19.7 oz) ooma Hub
12 VDC, 1.2A ooma Scout
Height: 37.5mm (1.5in)
Width: 100mm (4 in)
Depth: 82.5mm (3.25 in)
Weight: 190g (6.7 oz) Package Contents
Phone cable (2)
AC adaptor (120VAC, 60Hz)
ooma Scout device
AC adaptor (120VAC, 60Hz) Input and Output Ports
One 10/100 Ethernet LAN port
One 10/100 Ethernet WAN port
One RJ-11 port (phone)
One RJ-11 port (wall)
One RJ-11 port (phone)
One RJ-11 port (wall) ooma Scout
5 VDC, 2A User Interface
8 button back-lit keypad
1 back-lit ooma button
Volume control knob
Brightness control knob
Built-in speaker Minimum Requirements
High-speed Internet connection (cable, DSL or
256 Kbps upstream network speed (384 Kbps
Landline phone service (only if using the ooma
system with a landline) Environmental Requirements
Operating temperature: 5C to 40C
Operating humidity: 5% - 85% RH non-condensing
Storage temperature: 0C to 70C
Storage humidity: 5% - 90% RH non-condensing Regulatory Compliance
Safety: UL 60950-1
Electromagnetic Compatibility (EMC): FCC Part
15 Class B
Telecom: FCC Part 68 Warranty
One-year limited warranty 57 © 2008 ooma, Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited.
ooma, the ooma logo, ooma Hub, ooma Scout, Instant Second Line, Broadband Answering
Machine, the sound of the ooma dialtone, and all other ooma company, product and service
names and slogans are trademarks of ooma, Inc. All other product, service or brand names are
the property of their respective owners.
ooma reserves the right to revise this publication and to make changes in content from time to
time without obligation on the part of ooma to provide notification of such revision or change.
ooma provides this guide without warranty of any kind, implied or expressed, including but not
limited to, the implied warranties of merchantability and fitness for a particular purpose. ooma
may make improvements or changes in the product(s) described in this manual at any time. Important Safety Information
When using telephone equipment, including the ooma Hub™ and ooma Scout™
devices, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the following:
Do not use this product near water, for example, near a bathtub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk
of electric shock from lightning.
Use only the power adapter indicated in this manual. Do not insert the power
adapter into an extension cord, receptacle or outlet unless the prongs can be
To prevent overheating, situate the product away from heat sources such as
radiators, heat registers, stoves, or other products that produce heat.
Do not remove the cover of or disassemble any component of this product.
This product contains no user-serviceable parts. 700-0104-201 REV A...
View Full Document
This document was uploaded on 01/15/2014.
- Winter '14