R710 SqL virtualization

Configuring networking in the vm 1 power on the vm

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: e VM 1. Power on the VM, and open the console. 2. Click Start, Control Panel, Network Connections, then click Manage Network Connections. 3. Right-click the NIC, and choose properties. 4. Select TCP/IP (v4), and choose properties. 5. Set the IP address, subnet, gateway, and DNS server for this NIC, which will handle outgoing server traffic (i.e., the public IP). Click OK, then click Close. 6. On the Dell server, repeat steps 2 through 5 twice, but these NIC’s should be on the same network segment as the Dell EqualLogic storage. Installing the Host Integration toolkit on the VM (Dell only) 1. Download the host integration toolkit (Setup64.exe). 2. Double click Setup64.exe. 3. Accept the security warnings, and choose to run the exe. 4. Click Next. 5. Click Accept, then Next. 6. Click Typical, then Next. 7. You will see a Windows Firewall warning; leave it open for a minute. 8. Click the Start button, then choose Administrative Tools Windows Firewall with Advanced Security. 9. In the left panel, click Inbound Rules. 10. In the center Inbound Rules panel, right-click iSCSI Service (TCP-In), and choose Enable Rule. 11. In the center Outbound Rules panel, right-click iSCSI Service (TCP-In), and choose Enable Rule. Principled Technologies, Inc.: Virtualized OLTP workload performance comparison of end-to-end solutions: Dell PowerEdge R710 with Dell EqualLogic storage vs. HP ProLiant DL385 G5 with HP StorageWorks EVA 4400 storage 10 12. 13. 14. 15. 16. Close the Windows Firewall dialog. Clear the message box. Click Install. Click Yes to install multipath software automatically. Choose to restart the computer when the application prompts you to do so. Installing Windows updates 1. Power on the VM, and open the console. 2. Log into the VM. 3. Click Start, Windows Update. 4. Click View Advanced Options. 5. Click Never Check for Updates. 6. Click OK. 7. Click Check for Updates. 8. Click Install Now when the application prompts you to install an update for Windows update. 9. Click View available updates to ensure you install the necessary updates. Note: We installed the following updates: • Hotfix for Windows(KB942288) • Security Update for Windows Server 2008 x64 Edition (KB958687) • Update for Windows Server 2008 x64 Edition (KB957388) • Security Update for Windows Server 2008 x64-based Systems (KB938464) • Security Updates for Windows Server 2008 x64 Edition (KB955069) • Cumulative Security Update for Internet Explorer 7 for Windows Server 2008 x64 Edition (KB961260) • Security Updates for Windows Server 2008 x64 Edition (KB954459) • Security Updates for Windows Server 2008 x64 Edition (KB957097) • Security Updates for Windows Server 2008 x64 Edition (KB958623) • Security Updates for Windows Server 2008 x64 Edition (KB953733) • Security Updates for Windows Server 2008 x64 Edition (KB950762) • Update for Windows Server 2008 x64 Edition (KB955839) • Security Updates for Windows Server 2008 x64 Edition (KB958624) • Security Updates for Windows Server 2008 x64 Edition (KB950974) • Update for Windows Server 2008 x64 Edition (KB95197...
View Full Document

Ask a homework question - tutors are online