Www1hpcomproductsquickspecs13555div13555divhtml hp

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: n SAN, and 4 kits are needed for a Multi-Site SAN. CABLES AND CONNECTORS NOT INCLUDED. For supported cables & connectors, please reference the NC550SFP QuickSpecs at http://h18000.www1.hp.com/products/quickspecs/13555_div/13555_div.html HP StorageWorks P4000 HP StorageWorks P4000 1-node Unified NAS Gateway Node Unified NAS Gateway HP StorageWorks P4000 2-node Unified NAS Gateway Node HP StorageWorks P4000 HP StorageWorks P4000 Virtual SAN Appliance Software Stock LTU Virtual SAN Appliance HP StorageWorks P4000 Virtual SAN Appliance Software Software HP StorageWorks P4000 Virtual SAN Appliance Software E-LTU BQ891A AX705A AW588A AW589A TA688AB TA688AA TA688AAE Step 3 - Other P4000 SANs Options Description Two 6' Highline (IEC-IEC) power cord ships standard per P4300/P4500 Node NOTE: HP P4300/P4500 Storage Systems servers no longer ship standard with NEMA power cords (P/N 163719-002) that allow connection to 110V US wall outlets in a home or office. HP P4000 Storage Systems are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a HP P4000 Storage Systems using a 110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be ordered separately. If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please see the UPS and PDU cable matrix's on the Power Protection page under Power Cords that lists cable descriptions, requirements, and specifications for UPS and PDU units at the new HP Power Cord Link @ HP.com. Use the following new link: www.hp.com/products/powercords NOTE: Rack models ship standard with IEC cables. DA - 13552 Worldwide — Version 6 — August 6, 2010 Page 31 QuickSpecs HP StorageWorks P4000 G2 SAN Solutions Configuration Information Step Step 4 - Choose Supported Options For iSCSI Infrastructure Select each required option with quantities specified. The P4000 G2 SANs support industry standard Gigabit and 10 Gigabit (SFP+) Ethernet components from various manufacturers that conform to IEEE 802.3ab (1000base-T) standards. Description with Parts Shipped: For details on standard Gigabit Ethernet components (including Gigabit Ethernet switches, Network Interface cards and Ethernet cables) from HP http://welcome.hp.com/country/us/en/prodserv/networking.html Step 5 - Choose Rack Options Select each required option with quantities specified. Rack Airflow Requirements Rack 10000 G2 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must...
View Full Document

This document was uploaded on 01/20/2014.

Ask a homework question - tutors are online