Electrical_Power_Drivers-_ET3026WB-Chapt8_example_questions

A2748mw b1587mw c825mw d1428mw 85resistorvalue

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: upplied to each resistor? a) 9.16MW b) 5.29MW c) 27.5MW d) 47.6MW 8.5 (delta three phase power) Three resistors are connected in delta. The line voltage is 13.2kV and the line current is 1202A. What is the power supplied to the three phase load? a) 27.48MW b) 15.87MW c) 82.5MW d) 142.8MW 8.5 (resistor value) Three resistors are connected in delta. The line voltage is 13.2kV and the line current is 1202A. What is the ohmic value of each resistor? a) 19Ω b) 3.7Ω c) 2Ω d) 11Ω 8.8 Three incandescent lamps rated 60W 120V are connected in delta. What line voltage is needed so that the lamps burn normally? (The incandescent lamps are considered as resistors) a) 69.28V b) 120V c) 0.5V d) 360V 8.9...
View Full Document

This note was uploaded on 02/04/2014 for the course EE 1300 taught by Professor Bauer during the Spring '12 term at High Point.

Ask a homework question - tutors are online