WIDGETS V2 glossary

Prepare and send part requests description the

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: equests Description The process of using fasteners to secure the other parts to the base part. In the case of rework, this may involve removing original fasteners and replacing them, or loosening and re-tightening the original ones. Description Write up the part requests and send them to the central warehouse. Store new parts Re-inspect parts Description Description Store the newly received parts in their proper storage containers at the workstation. For Official Use Only For Official Use Only Repository: IDEF0 Process Analysis & Modeling; Date: 10/9/2009 Repository: IDEF0 Process Analysis & Modeling; Date: 10/9/2009 Unpackage parts Description Remove individual packaging material from the parts themselves. Verify fasteners & tightness Description Verify that the proper fasteners have been used to secure the parts on each widget and that they are tight. Widgets not in compliance are released from the test fixture and sent to rework. Verify part locations, orientations Description Verify that each proper parts are in the proper locations on each widget. Widgets not in compliance are released from the test fixture and sent to rework. Concept Pool For Official Use Only For Official Use Only Repository: IDEF0 Process Analysis & Modeling; Date: 10/9/2009 Assembled widgets Repository: IDEF0 Process Analysis & Modeling; Date: 10/9/2009 The assembled widget, still held in place in the fixture, but ready to be released for inspection. Inspection procedures Description Widgets that have been assembled and are ready for inspection. Description Assembly procedure Assembly tools & equipment Specific procedures for inspecting widgets to see that they conform to design specifications. Includes part location and orientation information and fasterner specifications. Inspection tools Description Inspection tools & equipment Tools and equipment specifically used for widget assembly: [TBC]. Completed widgets Description Tools and equipment used for widget inspection: [TBC]. Description Location of parts WIdgets that have been assembled and pass inpection and are ready for delivery. Defective widgets Description Knowledge of where the parts are stored in the workstation. Description Other widget parts Widgets that not only do not meet design specifications, but are so defective that they cannot be reworked and must be scrapped or their materials recycled. Environment factors Description Non-base parts of the widget, not including fasteners. Packaged parts to be inspected Description Factors of the work environment that may affect worker performance: illumination, noise, temperature, humidity [TBC]. Description Parts to be installed, still in packaging materials. Held bases Description Part demand Description The widget base part, held in the fixture so that other parts may be attached. The need for parts to assemble ordered w...
View Full Document

Ask a homework question - tutors are online