We also had another member of our class come up and

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: complete this exercise. Through communicating and helping my partners out we were able to get all measured values and get this lab complete in the lab period. In regards to step 4, the resistance of the inductor decreases the output of the oscilloscope because current is being stored in the inductor and taken away from the flow of the circuit. This is why the output decreases. Lastly, the proper way to measure Vo is to calculate it as well as measure it. This will allow you to compare your values and see where you may have errored and decide the right value. Once both values are the same then you can be sure that your value is correct....
View Full Document

This document was uploaded on 02/20/2014 for the course ECT 110 at University of Dayton.

Ask a homework question - tutors are online