Altera corporation university program design

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: amily Data Sheet. Altera Corporation University Program Design Laboratory Package User Guide ByteBlaster Parallel Port Download Cable Designs can be easily and quickly downloaded into the UP 1 Education Board using the ByteBlaster download cable, which is a hardware interface to a standard parallel port. This cable channels programming or configuration data between the MAX+PLUS II software and the UP 1 Education Board. Because design changes are downloaded directly to the devices on the board, prototyping is easy and multiple design iterations can be accomplished in quick succession. f UP 1 Education Board Description For more information on the ByteBlaster download cable, go to the ByteBlaster Parallel Port Download Cable Data Sheet. The UP 1 Education Board contains the elements described in this section. Figure 1 shows a block diagram of the UP 1 Education Board. MOUSE JTAG_IN Figure 1. UP 1 Education Board Block Diagram + BOARD C2 TDI TDO RAW – C19 DEVICE MAX_EXPANSION U5 FLEX_EXPAN_ C R2 R1 DC_IN VGA FLEX_DIGIT CONF_D TCK POWER – DC + EPC1 P1 ® P2 D5 D10 D6 D14 D3 D11 D7 D4 P4 D12 D8 D16 P8 P10 MAX_SW2 MAX_PB1 MAX_PB2 Altera Corporation JTAG_OUT P6 P9 MAX_SW1 P3 P5 FLEX_SWITCH D15 FLEX_EXPAN_ B D13 D2 EPM7128S EPF10K20 MAX_DIGIT D9 P7 D1 FLEX_PB1 FLEX_PB2 ® FLEX_EXPAN_ A 3 University Program Design Laboratory Package User Guide DC_IN & RAW Power Input The DC_IN power input accepts a 2.5 mm × 5.55 mm female connector. The acceptable DC input is 7 to 12 V DC at a minimum of 250 mA. The RAW power input consists of two holes for connecting an unregulated power source. The hole marked with a plus sign (+) is the positive input; the hole marked with a minus sign (–) is board common. On-Board Voltage Regulator The on-board voltage regulator, an LM340T, regulates the DC positive input at 5 V. The DC input consist of two holes for connecting a 5-V DC regulated power source. The hole marked with a plus sign (+) is the positive input; the hole marked with a minus sign (–) is...
View Full Document

This document was uploaded on 02/25/2014.

Ask a homework question - tutors are online