For more information on how to configure a device see

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: teps describe how to use MAX+PLUS II to configure the EPF10K20 device in a JTAG chain. For more information on how to configure a device, see MAX+PLUS II Help. 1. 2. Choose Multi-Device JTAG Chain Setup (JTAG menu). 3. In the Multi-Device JTAG Chain Setup dialog box, select EPF10K20 in the Device Name drop-down list box. 4. Type the name of the programming file for the EPF10K20 device in the Programming File Name box. The Select Programming File button can also be used to browse your computer’s directory structure to locate the appropriate programming file. 5. Choose Add to add the device and associated programming file to the Device Names & Programming File Names box. The number to the left of the device name shows the order of the device in the JTAG chain. The device’s associated programming file is displayed on the same line as the device name. If no programming file is associated with a device, “<none>” is displayed next to the device name. 6. Choose Detect JTAG Chain Info to have the ByteBlaster check the device count, JTAG ID code, and total instruction length of the JTAG chain. A message just above the Detect JTAG Chain Info button reports the information detected by the ByteBlaster. You must manually verify that this message matches the information in the Device Names & Programming File Names box. 7. Altera Corporation To configure more than one EPF10K20 device, turn on the MultiDevice JTAG Chain command (JTAG menu) in the MAX+PLUS II Programmer. To save the current settings to a JCF for future use, choose Save JCF. In the Save JCF dialog box, type the name of the file in the File Name box and then select the desired directory in the Directories box. Choose OK. 21 University Program Design Laboratory Package User Guide 8. Choose OK to save your changes. 9. In the MAX+PLUS II Programmer, choose Configure. Configure/Program Both Devices This section describes the procedures for configuring/programming both the EPF10K20 and EPM7128S devices in a JTAG chai...
View Full Document

This document was uploaded on 02/25/2014.

Ask a homework question - tutors are online