This section describes how to set these options to

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: e JTAG_IN connector on the UP 1 Education Board. This section describes how to set these options to perform the following actions: s s s s Program only the EPM7128S device Configure only the EPF10K20 device Configure/program both devices Connect multiple UP 1 Education Boards together in a chain EPM7128S Programming This section describes the procedures for programming only the EPM7128S device, (i.e., how to set the on-board jumpers, connect the ByteBlaster download cable, and set options in the MAX+PLUS II software). 18 Altera Corporation University Program Design Laboratory Package User Guide Setting the On-Board Jumpers for EPM7128S Programming To program only the EPM7128S device in a JTAG chain, set the jumpers TDI, TDO, DEVICE, and BOARD as shown in Figure 7. Figure 7. Jumper Settings for Programming Only the EPM7128S Device TDI TDO DEVICE BOARD C1 C1 C1 C1 C2 C2 C2 C2 C3 C3 C3 C3 Connecting the ByteBlaster Download Cable for EPM7128S Programming Attach the ByteBlaster directly to the PC’s parallel port and to the JTAG_IN connector on the UP 1 Education Board. For more information on setting up the ByteBlaster, go to the ByteBlaster Parallel Port Download Cable Data Sheet. Setting the JTAG Options in MAX+PLUS II for EPM7128S Programming The following steps describe how to use the MAX+PLUS II software to program the EPM7128S device in a JTAG chain. For more information on how to use MAX+PLUS II, see MAX+PLUS II Help. 1. 2. Choose Multi-Device JTAG Chain Setup (JTAG menu). 3. In the Multi-Device JTAG Chain Setup dialog box, select EPM7128S in the Device Name drop-down list box. 4. Altera Corporation To program more than one EPM7128S device, turn on the MultiDevice JTAG Chain command (JTAG menu) in the MAX+PLUS II Programmer. Type the name of the programming file for the EPM7128S device in the Programming File Name box. The Select Programming File button can also be used to browse your computer’s directory structure to locate the appropriate programming file. 19 University Pr...
View Full Document

This document was uploaded on 02/25/2014.

Ask a homework question - tutors are online