Smaller z value is located to the left side of larger

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 7000 psi and a standard deviation of 550 psi. Manufacturer Rivet Runs Through It (RT) produces rivets with a mean breaking strength of 6500 psi and a standard deviation of 300 psi. a) 10 points Which manufacturer will produce the lowest number of defective rivets? RR: ZRR = (5000 ­7000)/550 =  ­3.636 p(Z< ­3.636) = 1.38*10 ­4 used normsdist RT: ZRT = (5000 ­6500)/280 =  ­5.357 p(Z< ­5.357) = 4.23*10 ­8 used normsdist 2 3/6 CEE 202 – Engineering Risk & Uncertainty Spring 2011 (Bond) Homework 7 Distributions Aplenty RT has the lower fraction. Therefore it would produce the lowest number of defective rivets Alternative solution It can be also found by comparing ZRR and ZRT. Smaller Z value is located to the left side of larger Z value which means that the area under the CDF is less. b) 9 points If the camping gear maker buys 80% of its rivets from the...
View Full Document

This document was uploaded on 03/06/2014 for the course CEE 202 at University of Illinois, Urbana Champaign.

Ask a homework question - tutors are online