Select interactive 11 a small square and line will

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ference disk in the metal disk holder and place the holder in the instrument’s sample compartment. Perform the following steps: 1. In the OPUS software, click the small black arrow next to the measurement button and select “setup measurement” 2. Click the load button. Pick the file named anion.xps and click OK. 3. Select the advanced tab and notice the parameters that are set 4. Click on Save and Exit 5. Click the measurement button (not the small black arrow) 6. In the measurement window that appears click Start Background Measurement. A green bar on the bottom of the screen displays the number of scans completed. 7. When “No Active Task” appears remove the metal disc holder from the instrument place the first sample disk in the holder and replace the holder in the instruments...
View Full Document

This document was uploaded on 03/06/2014 for the course CHEM 2302 at Memorial University.

Ask a homework question - tutors are online