Lab Report 2

Actually i would appreciate it if can tell me the

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: (Actually, I would appreciate it, if can tell me the possible cause of the problem) PART A In this part of the lab, we connected pin 3, 5, and 14 together and 4 and 8 together. Pin 6 will act as an AC input. This allowed us make two NMOS, M2 and M1 in series, with gate of M2 connected to VDD acting as an pull-up resistor, while M1 will act as an actual MOSFET with AC input. With this we have got the following results and VTC shown in Figure 1: VOH=1.85V, VOL = 0.610V, VIH = 4.92V, and VIL = -0.24V. The transfer region gain is figure by change y over change x: 1....
View Full Document

This document was uploaded on 03/07/2014 for the course EE 416 at Penn State.

Ask a homework question - tutors are online