B31 physical layer sending end service specification

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: SERVICE SPECIFICATION (1) INPUTS From the layer above: (a) (b) (2) Buffers of bits corresponding to a CLTU. Control information. OUTPUTS To the layer above: (a) Status of the physical telecommand channel. To the receiving end of the layer: (b) Modulated radio frequency waveforms, radiated as Reference [3]. CCSDS 201.0-B-3 Page B-7 described in June 2000 CCSDS RECOMMENDATION FOR TELECOMMAND: CHANNEL SERVICE (3) INTERNAL FUNCTIONS (a) (b) B3.2 Establishes the physical radio frequency path to the spacecraft using CMM-1. Radiates a buffer of data bits serially according to the PLOP requested by the layer above. PHYSICAL LAYER: RECEIVING END SERVICE SPECIFICATION (1) INPUTS From the sending end of the layer: (a) (2) Modulated radio frequency waveforms which have been radiated by a transmitting station as described and specified in Reference [3]. OUTPUTS To the layer above: (a) (b) Symbol clock (if required). (c) Channel Active (modulated carrier/subcarrier present); used by layer above to select between Inactive and Search states, to validate the Decode state and in some cases to initiate inter-layer control instructions. (d) (3) Synchronized detected “dirty” symbol stream. S...
View Full Document

This document was uploaded on 03/06/2014.

Ask a homework question - tutors are online