Asanexampletheseinstructionswillgivethestepstosetupthe

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: creen appears showing the front of the MicroLab unit and a blue area under the heading ASensor@. Click on the blue area to get a list of the sensors. As an example, these instructions will give the steps to set up the system to measure temperature and time. To set up a thermometer, click on AThermometer (thermistor)@. On the picture of the front of the MicroLab unit there will be three areas with red lines around them showing the inputs that are available for a thermistor probe (see next page for picture). The thermistor probe will already be installed in AInput A@ (by the technicians) so you must click on the left input (A) on the screen, then click on ANext@. The sensor must be calibrated and so the screen that appears next is titled AThermistor Calibration@....
View Full Document

This document was uploaded on 03/12/2014 for the course CHEMISTRY 1100A at UWO.

Ask a homework question - tutors are online