Lab_4_Desc

Record this information next look at the lower right

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: que- View. Click and hold the right mouse button. Move the mouse forward and backward to cause rotation of the human model about the Y Axis. Move the mouse left and right to cause rotation of the human about the Z Axis. o Once you have roughly positioned the human figure in the vehicle cab, verify your camera settings against the template of camera settings provided below (for each vehicle model). View the “Camera” location, angle and offset dialog. Use the “Oblique- View” menu (or right click in the task view). [Oblique- View, Camera] Adjust the values in this dialog based on the provided templates. Capture an image of the dialog (for printing at a later time). o Once the camera location and angles are properly set, use the Side View along the X Axis in...
View Full Document

This document was uploaded on 03/13/2014 for the course ISE 723 at N.C. State.

Ask a homework question - tutors are online