Lec_8-Isometric in AutoCAD

Of mechanical engineering uniten 2006 creating round

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 113 OBE | Dept. of Mechanical Engineering | UNITEN | 2006 Creating round corner Before Draw ellipse arc Draw another ellipse arc After Trim Draw straight line from midpoint of top arc to midpoint of bottom arc Trim Trim 08 AutoCAD 3 MEMB113 OBE | Dept. of Mechanical Engineering | UNITEN | 2006 Dimensioning Use aligned dimension for linear dimensioning Use quick leader for isocircle Aligned dimension Quick leader UNIVERSITY OF KUALA LUMPUR, 32200 Lumut Malaysia 08 AutoCAD 3 MEMB113 OBE | Dept. of Mechanical Engineering | UNITEN | 2006 To make dimension aligned with isometric axes, follow few steps as: - Type DIMEDIT - Type O for Oblique - Select the dimension to be aligned, then Enter - Specify the obliquing angle For example, using the object above, for clockwise alignment such as 90, type 30 for the angle, whereas for 100, type -30 for the angle since anti-clockwise alignment....
View Full Document

Ask a homework question - tutors are online