Expt_20 - Lab-in-a-Box Experiment 20: Introduction to...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Lab-in-a-Box Experiment 20: Introduction to Phasors Name: ______________________ Pledge: _____________________ ID: ______________________ Date: ______________________ Procedure Analysis: 1. Find the angular frequency ( ) of the circuit in Figure 2. 10 ELEMENT FREQ = 1000Hz VAMPL = 2V Current Shunt A Figure 2: Circuit for determining phasor for various loads. 2. Determine the impedance of the element if the element is a: a. 1 k resistor b. 100 mH inductor Show that the 10 shunt has only a small effect on the impedance of the circuit by plotting the impedances in the imaginary plane. Calculate the percent change in the magnitude and phase angle of the impedance from that of the element alone. 3. Repeat the calculations in step 2 for an 10 nF capacitor using a 100 shunt. 4. Determine the current phasor for the current through each element. Reference the phase of all signals to a function generator phase of 0 o at t = 0. For these calculations, you may ignore the shunt....
View Full Document

This lab report was uploaded on 04/10/2008 for the course ECE 2014 taught by Professor Lkpendleton during the Fall '07 term at Virginia Tech.

Page1 / 2

Expt_20 - Lab-in-a-Box Experiment 20: Introduction to...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online