CCNP Advanced Cisco Router Configuration考前冲刺_383.docx

This preview shows page 1 out of 1 page.

The channel-group configuration is the actual channelization of the DSOs. DSOs (timeslots) 1through 11 have been placed into service for data purposes. The first timeslot is associated withchannel-group 0. Timeslots 6 through 11 have been associated with channel-group 8.The channel-group configurations allow you to create logical interfaces to which you canassign protocol attributes such as IP address, Internetwork Packet eXchange (IPX) networkaddress, and so on. Notice the configuration designates interface Serial 4/1:0. The 0 in thatcommand ties this logical interface back to channel-group 0, with which we associated only asingle DSO. In addition, we created interface serial 4/1:8. The 8 in the command ties back tochannel-group 8, with which we associated six DSOs. The aggregate bandwidth available tothat logical interface is the number of timeslots assigned multiplied by 64,000 bps.If you are planning to use Open Shortest Path First (OSPF)rInterior
End of preview. Want to read the entire page?

Upload your study docs or become a

Course Hero member to access this document

Term
Spring
Professor
Bryan Howell
Tags
Integrated Services Digital Network, Basic rate interface, D channel, channel group configuration

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture