Arc Resistance Test - a. Stop b. Reset c. Off 7. Remove...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Arc Test 1. Place plastic material on shelf. 2. Place probes on specimen (Make sure probes are flat on specimen. 3. Push switch to on. 4. Push switch to operate. 5. Push switch to auto (The arc will move one step higher every 60 seconds on auto). 6. When material starts to smoke or burn (fail arc resistance) push switches to
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: a. Stop b. Reset c. Off 7. Remove material. 8. Record time it took for material to fail (located on timer on machine). 9. Reset timer. 10.Repeat steps 1-10 until desired number of trials have been recorded....
View Full Document

This note was uploaded on 04/09/2008 for the course PET 375 taught by Professor Ibeh during the Spring '08 term at Pittsburg State Uiversity.

Ask a homework question - tutors are online