Tina-8A_Manual_(English)_ABB_rev-D_140311.pdf

The tina 8a connection block is intended for use in

Info icon This preview shows pages 5–9. Sign up to view the full content.

View Full Document Right Arrow Icon
The Tina 8A connection block is intended for use in safety circuits in accordance with EN 60204-1. Safety regulations Warning! Carefully read through this entire manual before using the device. The devices shall be installed by a trained electrician following the Safety regulations, standards and the Machine directive. Failure to comply with instructions, operation that is not in accordance with the use prescribed in these instructions, improper installation or handling of the device can affect the safety of people and the plant. For installation and prescribed use of the product, the special notes in the instructions must be carefully observed and the technical standards relevant to the application must be considered. In case of failure to comply with the instructions or standards, especially when tampering with and/or modifying the product, any liability is excluded. 2TLC172142M0201, rev. D 5 www.abb.com/jokabsafety 2014-03-11
Image of page 5

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon